Temporal variation of modulated-wave-train geometries and their influence on vertical bending moments of a container ship     

《Applied Ocean Research》2019

A towing experiment was conducted using a modulated wave train to investigate the vertical bending responses of a hydro-structural container ship model. In the experiment, a spatially periodic modulated wave train, as a model of a freak wave in successive high waves mimicking the so-called three sisters, was generated by the recently established higher-order spectral method wave generation (HOSM-WG) method. HOSM-WG enables us to control the location and timing of the maximum crest height in a wave tank. With precise control of the towing carriage, an experiment was conducted in which the timing of the encounters between the ship model and the modulated wave train was accurately determined. The maximum sagging moment (SM) was found to increase in proportion with the encounter wave height. However, because of differences in the relative depth of the fore and aft troughs, the maximum SM is highly variable for a given wave height. The temporal wave-geometry evolution caused the relative trough-depth to vary significantly within a wave period in the vicinity of the maximum crest height. As a result, depending on the encounter timing, the SM varied considerably for a given wave height. The temporal variation of the wave geometry is a robust feature of a modulated wave train and is common between the spatially periodic and temporally periodic modulated wave trains.  相似文献   

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析     

胡小鹏 《山东国土资源》2020,36(5):38-43

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。  相似文献   

Vulnerable groups and preliminary insights into intersecting categories of identity in Laamu Atoll,Maldives     

Karen E. McNamara  Rachel Clissold 《Singapore journal of tropical geography》2019,40(3):410-428

The notion of vulnerability has acquired a significant role in discussions around reducing risk and identifying vulnerable groups, which is particularly important for targeting risk‐reducing policy and practice. Through ten semi‐structured interviews with 24 stakeholders, this study collected local perceptions on the following groups considered most vulnerable in Laamu Atoll, Maldives: youth and children, women, the elderly, people with disabilities, displaced persons and migrants, and farmers. In doing this, the significance of intersecting categories of identity for understanding vulnerability emerged and was explored; an approach that is often absent or scarcely applied in studies that identify vulnerable groups in the Maldives and elsewhere. Intersections between location, youth and gender or disability, as well as gender and marital status emerged as relevant for the Laamu Atoll context. Although this study acknowledges the incompleteness of its intersectional analysis, these findings provide important preliminary insights into the role of intersectionality in shaping vulnerability experience. To enhance scholarship on vulnerability, future studies could further explore intersectionality in Laamu Atoll and the Maldives using this study as a base and also improve its practical applicability for policy and practice.  相似文献   

Efficient DEM‐based overland flow routing using integrated recursive algorithms          下载免费PDF全文

Pin‐Chun Huang  Kwan Tun Lee 《水文研究》2017,31(5):1007-1017

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.  相似文献   

An alternative Boussinesq equation considering the effect of hysteresis on coastal groundwater waves          下载免费PDF全文

Jun Kong  Zhaoyang Luo  Chengji Shen  Guofen Hua  Hongjun Zhao 《水文研究》2016,30(15):2657-2670

This paper presents an alternative Boussinesq equation considering hysteresis effect via a third‐order derivative term. By introducing an improved moisture–pressure retention function, this equation describes, with reasonable precision, groundwater propagation in coastal aquifers subject to Dirichlet boundary condition of different oscillation frequencies. Test results confirmed that it is necessary to consider horizontal and vertical flows in unsaturated zone, because of their variable influences on hysteresis. Hysteresis in unsaturated zone can affect the water table wave number of groundwater wave motion, such as wave damping rate and phase lag. Oscillations with different periods exert different hysteresis effect on wave propagation. Truncation/shrinkage of unsaturated zones also affects the strength of hysteresis. These impacts can be reflected in the alternative Boussinesq equation by adjusting the parameter representing the variation rate of moisture associated with pressure change, as opposed to traditional computationally expensive hysteresis algorithms. The present Boussinesq equation is simple to use and can provide feasible basis for future coupling of groundwater and surface water models. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Liquefaction potential evaluations by energy-based method and stress-based method for various ground motions     

《Soil Dynamics and Earthquake Engineering》2015

An energy-based liquefaction potential evaluation method (EBM) previously developed was applied to a uniform sand model shaken by seismic motions recorded at different sites during different magnitude earthquakes. It was also applied to actual liquefaction case histories in Urayasu city during the 2011 M9.0 Tohoku earthquake and in Tanno-cho during the 2003 M8.0 Tokachi-oki earthquake. In all these evaluations, the results were compared with those by the currently used stress-based method (SBM) under exactly the same seismic and geotechnical conditions. It was found that EBM yields similar results with SBM for several ground motions of recent earthquakes but has easier applicability without considering associated parameters. In Urayasu city, the two methods yielded nearly consistent results by using an appropriate coefficient in SBM for the M9.0 earthquake, though both overestimated the actual liquefaction performance, probably because effects of plasticity and aging on in situ liquefaction strength were not taken into account. In Tanno-cho, EBM could evaluate actual liquefaction performance due to a small-acceleration motion during a far-field large magnitude earthquake while SBM could not.  相似文献   

Hydrodynamic Performance of the Arc-Shaped Bottom-Mounted Breakwater     

楚玉川  程建生  王景全  李志刚  江克斌 《中国海洋工程》2014,(6):749-760

The problem of the hydrodynamic interaction with the arc-shaped bottom-mounted breakwaters is investigated theoretically. The breakwater is assumed to be rigid, thin, impermeable and vertically located in a finite water depth. The fluid domain is divided into two sub-regions of inner and outer by an auxiliary circular interface. Linear theory is assumed and the eigenfunction expansion approach is used to determine the wave field. In order to examine the validity of the theoretical model, the analytical solutions are compared to agree well with published results with the same parameters. Numerical results including wave amplitude, surge pressure, and wave force are presented with different model parameters. The major factors including wave parameters, structure configuration, and water depth that affect the surge pressure, wave forces, and wave amplitudes are discussed and illustrated by some graphs and cloud maps.  相似文献   

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

Conditional statistics of Reynolds shear stress in flow over 2D dunes in the presence of surface waves          下载免费PDF全文

Satya P. Ojha 《水文研究》2014,28(18):4829-4842

This study presents the analysis of the velocity fluctuations to describe the conditional statistics of Reynolds shear stress in flow over two‐dimensional dunes in the presence of surface waves of varying frequency. The flow velocity measurements over the dunes are made using a 16‐MHz 3D acoustic Doppler velocimeter. The joint probability distributions of the normalized stream‐wise and vertical velocity fluctuations at different vertical locations are calculated in the trough region of a selected dune in quasi‐steady region of the flow. Third‐order moments of the stream‐wise and vertical velocity components over one dune length are also calculated throughout the flow depth for understanding the effect of surface waves on relative contributions to the Reynolds shear stress due to the four quadrant events. The structure of instantaneous Reynolds stresses is analysed using quadrant analysis technique. It has been shown that the contributions of second and fourth quadrant events to the Reynolds shear stress increase with increase in the frequency of surface waves. In fact, the largest contribution to turbulent stresses comes from the second quadrant. The cumulant discard method is applied to describe the statistical properties of the covariance term u′w′. Conditional statistics and conditional sampling are used to compare the experimental and theoretical relative contributions to the Reynolds shear stress from the four quadrant events. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Application of the numerical manifold method for stress wave propagation across rock masses     

G. F. Zhao  X. B. Zhao  J. B. Zhu 《国际地质力学数值与分析法杂志》2014,38(1):92-110

In this paper, the numerical manifold method (NMM) is extended to study wave propagation across rock masses. First, improvements to the system equations, contact treatment, and boundary conditions of the NMM are performed, where new system equations are derived based on the Newmark assumption of the space–time relationship, the edge‐to‐edge contact treatment is further developed for the NMM to handle stress wave propagation across discontinuities, and the viscous non‐reflection boundary condition is derived based on the energy minimisation principle. After the modification, numerical comparisons between the original and improved NMM are presented. The results show that the original system equations result in artificial numerical damping, which can be overcome by the Newmark system equations. Meanwhile, the original contact scheme suffers some calculation problems when modelling stress wave propagation across a discontinuity, which can be solved by the proposed edge‐to‐edge contact scheme. Subsequently, the influence of the mesh size and time step on the improved NMM for stress wave propagation is studied. Finally, 2D wave propagation is modelled, and the model's results are in good agreement with the analytical solution. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献